2024 Land Pride WC15 Series WC1504

Information

2024 Land Pride WC15 Series WC1504

Land owners can utilize a Land Pride WC1504 Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor's PTO, this unit features a self-feeding 4" cutting capacity, four reversible and replaceable hardened-steel knives, adjustable discharge chute, and direct drive to rotor. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor's output shaft, enabling the driveline to remain straight and level.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

SUPPORT STANDS

Adjustable support stands help you match up to a tractor easier and allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.

270° DISCHARGE CHUTE

Adjustable rotating discharge chute directs where wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator.

CUTTING KNIVES

1/4" Hardened steel cutting knives are reversible and replaceable. Each knife has two cutting edges - when one is worn, rotate 180° to a new cutting edge. Less downtime required to sharpen rotor knives. WC1503 - 2 knives / WC1504 - 4 Knives.

Photos

Highlights

  • Leduc, Alberta
  • 2024
  • Land Pride
  • WC15 Series WC1504
  • Available
  • Feed Above Ground: 24 in to 30" in (61 cm to 76.2 cm) With adjustable stands | Discharge: 58 in to 64 in (1.47 m to 1.63 m)

Specifications

  • 2024
  • Land Pride
  • WC15 Series
  • WC1504
  • General
  • 20 to 50 hp (14.9 to 37.3 kW)
  • 35 hp (26.1 kW) for maximum capacity
  • Category: Cat. 4 with shear bolt
  • Power Take-Off: 540 rpm | Rotor: 540 rpm (Direct Drive)
  • Cat. l w/ Quick capabilities
  • Upper Hitch Plate Thickness: 5/16 in (8 mm) | Main Frame Thickness: 3/16" in (5 mm) | Rotor Housing Thickness: 3/16" in (5 mm) | Chip Capacity: 4 in (10.2 cm) | Hopper Inlet Opening: 20 in x 20 in (50.8 cm x 50.8 cm) | Chipper Inlet Opening: 10 in x 4 in (25.4 cm x 10.2 cm) | Spout Discharge Opening: 5 1/4 in (13.3 cm) Square | Chip Chute Position: 270 degrees
  • Size: 25 in (63.5 cm) | Knife Size: 6 in x 2 in x 1/4 in (15.2 cm x 5.1 cm x 0.6 cm)
  • Feed Above Ground: 24 in to 30" in (61 cm to 76.2 cm) With adjustable stands | Discharge: 58 in to 64 in (1.47 m to 1.63 m)
  • 450 lbs (204.1 kg)
  • Rotor Knife: Reversible and Replaceable
  • Number of Rotor: 4
  • Rotor Knife: Hardened Steel (Specifically designed for chipping)
  • Self-feed
  • Feed Height Adjustment: 6 Settings